Type	medical titanium bars for joint
Standard	ASTM F136
Grade	Ti6Al4V ELI/Gr5 ELI/GR23
Size	Dia7.0~25.0mm* L
MOQ	50kg
Shipment	By sea, By railway or by air
Payment Terms	Usually T/T
Package	Standard export packing
Test Report	Our medical titanium bars for joint stemss will be certified by the authoritative third-party and the material certificate can be provided.
Advantage	Our medical titanium and titanium alloys bars and rods can reach h6 tolerance, micro structure can reach A3 and quick delivery within 7 days if have stock and 15~30 days if producing.
NOTE: the special specification can be produced according to customers' requirements.

From raw material to precision medical grade titanium bars for joint stems. We produce with strict quality control at every step. Making each piece forged titanium bars we produced with strength and perfection.

We stop 12 steps to control the whole production process.

We engineered a 12-gate control loop where inspection precedes manufacturing and data speaks before the metal does:

1. Incoming = Final Judgement

Only Grade-0 / 0A sponge Titanium is accepted. Every lot is screened for full chemistry + O-N-H content; fail one parameter, the whole batch is rejected at the dock.

2. Zero-defect process flow

Smelting → forging → rolling → peeling → annealing → straightening: each step ends at a "stop-and-verify" station:

4-in-1 rapid test: dimension, surface, microstructure, hardness;

Real-time data uploaded to MES; any deviation > 3σ triggers automatic line lock;

Non-conforming pieces are quarantined on the spot-never forwarded.

3. Pre-shipment 5 × 100 % Screen

① 100 % UT – cracks or inclusions ≥ 0.3 mm detected;

② 100 % ET – surface flaws down to 5 μm eliminated;

③ 100 % laser gauging – tolerance band h6, Cpk ≥ 1.67;

④ 100 % roughness scan – Ra ≤ 0.2 μm mirror finish;

⑤ 100 % mechanical & metallographic audit – UTS, YS, elongation, grain size recorded bar by bar.

Any single failure keeps the bar inside the gate.

4. Third-party Blind Verification

Retained samples are sent to SGS/TÜV/China National Inspection body for parallel testing: chemistry, mechanical, cleanliness, biocompatibility. Only lots with 100 % match between in-house and external reports are released; certificates travel with every shipment worldwide.

Twelve gates, one promise:

Every medical grade titanium bars for joint stems leaves with a digital birth certificate-zero risk, zero doubt, zero failure for the world's most critical implants.

Hot Tags: titanium bars for joints, China titanium bars for joints manufacturers, suppliers, factory, ASTM F136 Titanium Alloy Bars, GR23 Titanium Bars, GR5 ELI Medical Titanium Bars, Implant Grade Titanium Rods, Titanium Bars for Bone Screws, Titanium Rods for Internal Bone Fixation

Products

Titanium Bars for Joints